⭐ TopGainers Hunter™ — How It Works
TopGainers Hunter™ is a continuation-momentum system designed to capture the explosive 2nd, 3rd, and 4th waves of the strongest Top Gainers of each trading session.
Instead of predicting direction or scanning hundreds of charts, it waits for real momentum to return — and only then alerts you with one signal:
The White Diamond.
This signal appears only when the internal algorithm detects a rare combination of:
Volatility alignment
Trend strength
Volume release
RSI & StochRSI expansion
MACD structure confirmation
Price-to-SMA continuation behavior
When all conditions sync and the stars align, the White Diamond prints — showing real buyer strength returning after the first parabolic move.
It’s built for traders who want simplicity, clarity, and high-probability continuation signals without noise, guessing, or endless screen time.
Every White Diamond means:
Momentum is back
Buyers have returned
Continuation potential is high
The move is already underway
No guessing. No prediction.
Just real continuation from the market’s strongest gainers.
⭐ Step-by-Step: How to Use TopGainers Hunter™
Step 1 — Check the Top Gainers List
Do this at one of three times:
5:00 PM (after-hours)
7:00 AM (pre-market)- 10:00 AM (Regular Trading Hour)
Identify the Top 3 Gainers of the session.
Step 2 — Add Only the Top 3 to Your Watchlist
TopGainers Hunter™ is designed for the strongest movers only — not the whole market.
Step 3 — Set One White Diamond Alert Per Ticker
No need to watch charts all day.
One alert per ticker is enough.
Step 4 — Walk Away Until the Alert Fires
No alert = no trade.
No guessing.
No overthinking.
Step 5 — When the White Diamond Fires, Momentum Is Already Back
The continuation wave has begun.
Your only job is TRADE MANAGEMENT:
Stop-Loss:
0.01 below the signal (White Diamond) candle.
Targets:
+10% to +50% depending on volatility and position strength.
⭐ Timing Expectations (Very Important)
If checking at 5:00 PM (after-hours):
Continuation moves typically occur 5:15 PM - 7:00 PM the same session.
Expect early momentum.
No Alert = No Trade.
If checking at 7:00 AM (pre-market):
Continuation moves typically occur 7:15 AM – 8:30 AM opening bell.
Expect opening-drive momentum.
No Alert = No Trade.
If checking at 10:00 AM (regular trading hour):
Continuation moves typically occur 10:15 AM - 12:00 PM power-hour.
Expect late runner momentum.
No Alert = No Trade.
Recommendation: my personal favorite is the 7:00 am and 10:00 am sessions. These are sleeper runners which often run-up until closing and they usually produce the best gains, north of 200-300%+. These are the unicorns.
⚠️ Cardinal Rules: which ever sessions you choose to play, before setting alerts for the current session, you must delete 3 alerts of previous sessions. ONLY PLAY 3 ALERTS OF THE CURRENT TOP 3 GAINERS AT A TIME. KEEP THE SYSTEM SIMPLE AND DO NOT OVER COMPLICATE THINGS.
⭐ The Philosophy
TopGainers Hunter™ eliminates prediction entirely.
It focuses only on:
The strongest tickers
At the strongest moments
When real momentum returns
One clean signal.
One powerful setup.
Zero noise.
If you trade momentum… this is your new edge.
⚠️ Why You Shouldn’t Rely on YouTube Signal Providers
The Top Gainers market moves at high speed.
Five seconds late can cost you opportunity — and one minute late can destroy a 5–10% move.
Many YouTube signal channels send alerts after they see momentum, not when momentum actually returns. By the time they post a message, record a clip, or press upload, the move is already aging.
You should never put your money on the line based solely on these delayed signals.
They are human-operated, which means:
Humans get tired
Humans make mistakes
Humans get sick
Humans miss entries
Humans react slower than live data
Signal channels are not built for precision.
They are not real-time systems.
⚡ TopGainers Hunter™ Is Different
TopGainers Hunter™ is fully objective and operates instantly the moment continuation momentum returns.
It never sleeps.
It never gets sick.
It never hesitates.
It never posts late.
As long as the stock market is open, the system is active — scanning, tracking, and waiting for real continuation conditions to align.
Every trading sessions, the market delivers Top 3 Gainers, and TopGainers Hunter™ continuously monitors them for the exact moment buyer momentum returns.
When the conditions align, the White Diamond prints immediately on your chart — not a minute later, not after an upload, not after a human reacts.
This makes TopGainers Hunter™:
Consistent
Strictly rule-based
Always on-time
Not human-dependent
Built for real-time continuation detection
It’s not a signal group.
It’s not delayed.
It’s not opinion.
It’s your personal real-time system, running every market day for as long as markets exist.
⭐ Key Message
Don’t depend on delayed signal providers.
Don’t depend on human timing.
Don’t depend on guesswork.
Depend on an algorithmic-rule-based continuation system that alerts you the moment momentum truly returns to the strongest gainers of the day.
TopGainers Hunter™ gives you clarity, structure, and speed — exactly what fast-moving Top Gainers demand.
_________________________________________________________
⚡ TopGainers Hunter™ — Quick Start Tutorial
🎯 Purpose
TopGainers Hunter™ is a continuation momentum signal™ detection system designed to capture the explosive 2nd, 3rd, and 4th waves of the strongest Top Gainers each trading day.
It focuses only on confirmed momentum return, not prediction — giving you a single, clean signal:
💎 The White Diamond
When the White Diamond appears, it marks the exact moment buyer momentum returns after the first parabolic move — confirmed by internal conditions like volatility compression, volume release, and SMA alignment.
Quick-Start-Tutorial
🧭 Step-by-Step Setup
Step 1 — Identify Top 10 Gainers
At either:
5:00 PM (After-Hours), or
7:00 AM (Pre-Market), or- 10:00 AM (Regular Trading Hour)
Go to your brokerage scanner or TradingView’s “Top Gainers” list.
Add the Top 3 tickers to your watchlist.
Step 2 — Apply TopGainers Hunter™
Open each of those tickers on a 5-minute or 10-minute chart.
Apply TopGainers Hunter™ from your Invite-Only Scripts section.
Step 3 — Set Your Alert
Right-click on the chart → Add alert on TopGainers Hunter™ → “White Diamond Triggered”
Set one alert per ticker.
Then walk away — the system will notify you the moment continuation returns.
Step 4 — Wait for the Signal
No alert = no trade.
No guessing.
No prediction.
When the White Diamond fires, the move is already underway — your only job is trade management.
Step 5 — Manage the Trade
Entry: When White Diamond prints
Stop-Loss: 0.01 below the signal candle
Targets: +10 % – 50 % depending on volatility
TopGainers Hunter™ filters false moves and only activates when multiple momentum structures align.
⏰ Timing Notes
5 PM After-Hours list: Continuations often appear 5:15 PM - 7:00 PM same session.
7 AM Pre-Market list: Continuations often appear 7:15 AM – 9:00 AM after market open.- 10 AM Regular Trading Hour list: Continuation often appear 10:15 AM - 12:00 PM during power hour.
If no White Diamond appears during those windows — no trade.
Let the market reset and repeat the next session.
⚠️ Cardinal Rules: which ever sessions you choose to play, before setting alerts for the current session, you must delete previous sessions. ONLY PLAY 3 ALERTS OF THE CURRENT TOP 3 GAINERS AT A TIME. KEEP THE SYSTEM SIMPLE AND DO NOT OVER COMPLICATE THINGS.
⚠️ Pro Tip
Avoid relying on delayed YouTube signal channels — most alerts are posted after momentum has already started.
TopGainers Hunter™ operates instantly and objectively, giving you real-time confirmation at the exact moment power returns to the Top 3 Gainers.
It never sleeps, never misses, and never guesses — just pure data precision every trading day.
✅ Summary
Focus on the Top 3 Gainers at a time only
Set one alert per ticker
Wait for the White Diamond
Trade only confirmed continuation
No alert = no trade
One signal. One rule. Infinite consistency.